E-Tech ET8 Bedienungsanleitung PDF herunterladen (Seite 14)

E-TECH ET8 V4 CONTROL PANEL - USER MANUAL

OPERATION

If a detector becomes faulty and cannot be

Sealed when arming the panel, then its zone

may be Excluded so that it does not generate

alarms.

When zones have been Excluded, the EXCLUDE

light flashes continuously while the panel is

Disarmed and also when Armed.

Zones can only be Excluded when the panel is

Disarmed.

Zone Exclude IS not permanent. Excluded

zones are automatically INCLUDED next time the

panel is Disarmed.

Zones can be manually included by the same

method as Excluding. Simply use the

[ZONE NUMBER] sequence to turn OFF the

zone lights to be Included.

The zone light of each Excluded zone will turn on The zone light of each Excluded zone will turn on

or... [User Code]

[Zone No.] [Zone No.][Zone No.] [Zone No.]

ENTER

or...

Press...Press...

Press... Press...

The

The The

Enter the zone number of the zone/s to be Excluded

to exit Exclude mode to exit Exclude mode

Enter the zone number of the zone/s to be Excluded

Exclude light will turn on

Exclude light will flash continuously

The EXCLUDE icon will turn on

EXCLUDE icon will flash continuously

[User Code]

LED KEYPAD

EXCLUDING ZONES

LCD KEYPAD

NOTES

• EXCLUDE E works only when the panel is Disarmed.

• EXCLUDE [User Code] E works in any state.

• EXCLUDE [User Code] E can only exclude the zones in the Area assigned to that code.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Keine Kommentare

E-Tech ET8 Bedienungsanleitung Seite 14