E-Tech ET8 Installationshandbuch PDF herunterladen (Seite 19)

PROGRAMMING

E-TECH ET8 (V4) CONTROL PANEL – INSTALLER MANUAL

DAY ZONES

Day Zones operate when the panel is fully disarmed, i.e. when Area 1, Area 2

and Monitor are all off. When alarmed, these zones will activate the assigned

outputs instantly.

The outputs mapped to the Day Zone will turn on while the zone is unsealed.

Turn P64E 2E on, to limit Day Zone alarms to 2 seconds.

PROGRAMMING SEQUENCE:

P53E [Zone No]E toggles the options ON and OFF

P53E [Zone No]E OFF: The zone is not a Day zone

P53E [Zone No]E ON: The zone is a Day zone

P53E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

all OFF: No Day zones

NOTES:

• RELATED OPTIONS:

P63E 5E–8E Day zone output mapping

P64E 2E 2 sec Day Mode alarm

• TYPICAL USES:

Instant alert when a delivery door is

opened.

Doorway alert for a shop. Turn ON option

P63E 7E for keypad sonalert when a

Day zone alarms.

24hr ZONES

24hr Zones operate at all times regardless of the mode of panel operation, i.e.

Armed, Disarmed or Monitor. When alarmed, these zones will activate

assigned outputs immediately. To reset those alarms a valid user code must

be entered.

Selecting a zone as 24hr will override any other zone type setting such as

Instant, Delayed or Handover.

PROGRAMMING SEQUENCE:

P52E [Zone No]E toggles the options ON and OFF

P52E [Zone No]E OFF: The zone is not a 24hr zone

P52E [Zone No]E ON: The zone is a 24hr zone

P52E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

all OFF: No 24hr zones

NOTES:

• The Tamper input is always a 24hr zone

• For silent 24hr zones, simply deselect the

zone/s from options P54E–P57E (Reset,

Strobe, Sonalert & Siren)

• To change a 24hr zone to any other

zone type, the zone must also be re-

assigned to an AREA (P45E or P46E).

24hr zones are independent of Area

operation. All other zone types must be

assigned to at least one Area to

become active.

MONITOR ZONES

Monitor zones allow you to Arm selected zones while others are ignored.

Typically used for perimeter zones such as windows and doors while you are at

home. Example: Upstairs zones are Disarmed while downstairs zones are

Armed in Monitor mode.

PROGRAMMING SEQUENCE:

P51E [Zone No]E toggles the options ON and OFF

P51E [Zone No]E OFF: The zone is not a Monitor zone

P51E [Zone No]E ON: The zone is a Monitor zone

P51E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

all OFF: No Monitor zones

NOTES:

• RELATED OPTIONS:

P63E Monitor Mode output mapping

P64E 1E 2 second Monitor Mode alarm

P64E 3E Monitor zones have Entry

Delay2

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

E-Tech ET8 Installationshandbuch Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme E-Tech ET8